K
KeithG
Guest
I am thinking about a DIY project to convert my sea & sea dx1g from optical strobe to wired sync cables.
The camera has a hotshoe, but no ttl pins, so manual strobe use only.
First thought is to use the 4 pin cables since there are lots of real cheap motormarine bodies available on eBay that can donate a bulkhead connector. All I need is some cheap cables.
I believe the sea & sea part number is 17200, but I have not been able to find a ready & cheap supply.
I am willing to pay rock bottom prices for a few cables that someone has lying around in their closet. Cables need to be functional.
Thanks!
THe strobes are ys110s.
The camera has a hotshoe, but no ttl pins, so manual strobe use only.
First thought is to use the 4 pin cables since there are lots of real cheap motormarine bodies available on eBay that can donate a bulkhead connector. All I need is some cheap cables.
I believe the sea & sea part number is 17200, but I have not been able to find a ready & cheap supply.
I am willing to pay rock bottom prices for a few cables that someone has lying around in their closet. Cables need to be functional.
Thanks!
THe strobes are ys110s.