Service manual for Bauer P0 purifier?

[jvisser]

The only manual I lack for my Bauer Purus/P0 setup is the service manual for the purifier. Does anyone know where I can download it?

The reasons:

a. broken filter cartridge spilled carbon inside - I'd like to know how the system goes together so I can thoroughly clean it;
b. when removing the top to replace the cartridge, the purifier body rotated on the base block a bit. I tightened it back up, but I'd liek to know procedures, torque specification, etc.

Thanks very much,

jv

 

[dannobee]

I just looked through the manual for my Utilus and the SM for the P0 is included somewhere in the middle. There's a page or two dedicated to it, and not much more.

 

[jpsexton]

http://www.scubaengineer.com/bauer_compressor_servicing_inforx.htm

Try this link, the PO is included as a section in most of the compressor manuals.

 

[jvisser]

Thanks, guys.

jv

 

[Hoosier]

http://www.scubaengineer.com/bauer_compressor_servicing_inforx.htm

Try this link, the PO is included as a section in most of the compressor manuals.

John is right.

Here is the attachment that I have stored.


I hope Alkin has the same manual/Schematic as Bauer has...

 

[rjack321]

I hope Alkin has the same manual/Schematic as Bauer has...

Not even close. The Alkin is a much simpler design than than Bauer - despite taking the same cartridges just upside down.

 

[Hoosier]

Not even close. The Alkin is a much simpler design than than Bauer - despite taking the same cartridges just upside down.

I know it.. But, I would like to have some written reference as a newbie. You know that we can't google all information everytime.