What Equipment Are You Using?

[hecker-the-wrecker]

bc= mares v-1, mask= pano p-4 ,reg=mares proton ice/ with ice octo , tusa xpert zoom fins, akona 7 mil one piece & 3-mil shorty,cheap 9$ knife, jet fins, mares stream dry snorkle, saving money for drysuit.

wow!! i forgot about this!! now i also have a dui450 w/300g polarfleece,40 pony with alumminum quickdraw bracket,2 different hoods, 2 pairs of boots, 3 pairs of gloves,cl4 light! (also bidding on scubapro reg and din to yoke conversion)

 

[frameless]

Setup

Scubapro Knighthawk BC
Scubapro MK25/S550
Scubapro Frameless
Scubapro Twinjet
Henderson Goldcore 3mm
Suunto Cobra

 

[DiverCCRN]

I use the following:

Seavision 2000 color correcting mask
Dacor Integra Mask (Backup)
Dacor Integra Snorkel
Scubapro MK25/S600 Regulator + R180 Octo
Aeris 500AI Computer
Citizen HyperAqualand
Zeagle Octo+ (not using currently)
Zeagle Tech BC
Mares Plana Avanti Quatro Fins
Body Glove 7mm Unisuit
Henderson 7mm Shorty/Farmer John custom (Too hot)
Body Glove 3mm shorty
One heck of a first aid kit!

Guess thats the important stuff..... I got tons of knick knacks!!!!!

DiverCCRN

 

[FinaddictFred]

Zeagle Concept II BC
Oceanic Delta /w enviro kit
Oceanic Gauge Set
Dacor Viper octo
Tusa Liberator X-Ten fins
Aqualung Blades II fins
Tusa Visulator m-14 mask
Mares Lirica mask
Henderson 2 piece 7mm
Deep See 5/4/3mm 1 piece

 

[jenazah]

Ouch, updated already.

Atomic Z1 Regulator
Dacor Viper Octo
Aqualung Malibu RDS BC
Aeris Atmos 1 Computer
Aeris Pressure Gauge & Compass
Aeris Velocity Fins
Bare Supra 7mm 2pcs wetsuit
Body Glove Hood
Tusa Cold Water Gloves
Mares Avanti 5mm boot
Cressi-Sub Big Eyes Mask
80 cu Al Tank
Nikon Coolpix 2100 + Fantasea CP-3 Housing

Aqualung Titan Regulator
Aqualung XLC Octopus
Aqualung Malibu RDS BC
Aeris Atmos 1 Computer
Aeris Pressure Gauge & Compass
Aeris Velocity Fins
Bare Supra 7mm 2pcs wetsuit
Body Glove Hood
Tusa Cold Water Gloves
Mares Avanti 5mm boot
Cressi-Sub Big Eyes Mask
80 cu Al Tank
Nikon Coolpix 2100 + Fantasea CP-3 Housing
UK Q40 ELed Light

 

[Vie]

This is pretty much what I usually dive with:

Decathlon 3mm wetsuit
Oceanic Mini Shadow mask
0.5mm Tilos hood
Apeks ATX200 (DIN) with OMS G-240 SPG
Scubapro S-Tek harness with Zeagle split saddle harness/TravTek wing (yes, the cheap Scubapro copy of the origianl Dive Rite Transpac; it has served me well over the years but it was my first rookie purchase mistake).
Oceanic 5mm booties
Scubapro Jetfins or Apollo Biofin Pro
Mares gloves
Oceanic Atom computer
Oceanic wrist compass
2 very small Zeagle knives
Surface marker
Halcyon gap reel
UK Sunlight SL4 torch
whistle
a CD
wrist slate and pencil
Sony Cyber-shot DSC-T1 in MPK-THA housing (if only it can handle a memory stick larger than 512MB it’d be perfect!).

 

[Eris Lucan7*]

2 Coltri sub regulators.
1 Nemrod Aries regulator.
-
1Nemrod Xtreme BC jacket
1CressiJ107 jacket
-
1Nemrod Crypton mask
1Nemrod 1 glass mask
1Mezeler O-Glass mask
-
1pair Nemrod fins
1pair prodigi fins
-
1Nemrod 3mm Shorty
1Nemrod7mm halfdry
-
2Alu 12 liter tanks High
1-4 liter steel reseve tank.
-
1Areotechnica Coltri MCH6 Compressor
-
14Kg vinuel coverd leadbars.
1 Otterbox.
-
1marine seek light 20000 candelar watersave
-
1 z-lite pocket lamp
-
a Junghans economy solar standart watsh
-
suunto favor's computer.
-
1Nemrod Fini-Compass console
1 Megasport 5vwies console
.....

 

[RiverRat]

Here goes....Wow I've bought a lot in less than 2 years, not to mention the training and travel..ouch.......

Henderson 3mm shorty
Henderson 3mm full (not used it yet)
O'Neill 7000X 7mm full wetsuit
Henderson 7mm hood
DeepSee Reef gloves, Scubapro 5mm gloves
Suunto Vyper computer and a Timex Helix as a backup bottom timer/depth guage
Custom built Suunto computer downloader cable (from Jamei on SB)
Butchered Sherwood console (just using SPG in single console, depth guage as spare backup on hose mount)
Apeks ATX200 1st and 2nd with an Apeks ATX50 Octo DIN, Aqualung Titan LX yoke as a spare reg
Oceanic Regulator bag
Zeagle DIN to Yoke adapter
Suunto SK-7 Compass
Aqualung Mythos mask, DeepSee mask now as a spare
FredT 9# stainless steel backplate, FredT 2# Aluminum backplate
2 FredT 2# STA's, 2 Scubapro tank straps
Custom weight belt (standard webbing / Scubpro type buckle)
10# FredT P-weight (had not used it yet)
Oxycheq 45# singles wing
Oceanic 5mm Booties
Scubapro Jetfins with FredT springstraps
2 PST E-7 100 cu. ft. steel tanks
1 Princeton Tec Shockwave II Primary light
1 Princeton Tec Sea Star locator
1 UK Mini Q40 backup light
OM Titanium dive knife
Safety Sausage
Dive Alert
Tank banger (too much of a hassle, never used)
Tube type dive flag/float
Various 2# and 3# standard lead weights
Slate/dive tables etc.
Olympus C5050 digital camera, PT-015 case, memory cards
Various regulator tools from Peterbuilt/ rebuild kits / spare parts
/hoses/clips/books/etc.

 

[ShakaZulu]

Looks like a bunch of you guys were taken to the cleaners. No wonder the scuba diving industry is so strong. Could we have a ScubaBoard sale for all the stuff you don't use anymore????

 

[RiverRat]

Looks like a bunch of you guys were taken to the cleaners. No wonder the scuba diving industry is so strong. Could we have a ScubaBoard sale for all the stuff you don't use anymore????

:11: Actually most of mine is in use, luckily I found Scubaboard BEFORE I found the LDS. When they tried to put me in a stab jacket I stumbled on the wisdom of FredT and also found Leisurepro.