Closed Anyone looking for parts? AKA ramblings

Sold or no longer available

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I only use plastic orifices now, cheaper and they don't corrode. If good enough for the S620 X-Ti good enough for a G250. Those I have on hand.​
The barrel I do not. I did have one but it was so rough I binned it.​
 
My plan is to move back to Japan. The last 7 months have shown me I cannot live apart from my son and Japan is not so bad a place to live. That being the case I'll get back into regular orders but this time I'd like to make a few pennies on the side as it really is quite a mammoth effort to do these orders, takes a bunch of time.

Watch this space.
 
I'll get back into regular orders but this time I'd like to make a few pennies on the side as it really is quite a mammoth effort to do these orders, takes a bunch of time.
As you should. And sometimes, you get deadbeats whose orders are cash out of your pocket.

Now, What is the part cost for a Ti MK 11 body?
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom