Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Thanks!!! finally found it =)As the MaxAir 35 is (I think) the same as the Coltri MCH 6, you might get some benefit from the Coltri Manual which is online at Aerotecnica Coltri Spa
ThanksFilters and oil. At 100 hours, there is a valve kit. Keep it clean, cool and use it. The worst thing you can do with it is to let it sit.
Filters and oil. At 100 hours, there is a valve kit. Keep it clean, cool and use it. The worst thing you can do with it is to let it sit.
We would love to have you here in Orange County, where we dive weekly shore and boat =)This is something I’ve been concerned about.
I have a Poseidon PFU-150 (6 CFM 3-stage Bauer block) not a Coltri. But I’ve heard this advice before.
Would you mind giving us some idea of a minimum usage recommendation? Both frequency and minimum duration?
In my case, I have two issues: I have too much bank, so I can fill everything and go many weeks between fills. (So stop
filling the bank...) The other thing is I live in the frozen tundra where I only dive 6 months in a year, and when it’s below freezing I can’t run the compressor.
Of course, I have a third issue: I need to dive more... Or move to Orange County with @John Pham ...
If it’s not too much of a hijack, do you have any suggestions?