Dave616
Contributor
Cold Fresh Water
1. Backplate: DGX SS Plate w/Oxycheq 2-piece STA and DR Roller Cambands
2. Wing: Oxycheq 30# Extreme
3. Harness: Dive Rite Basic Hog w/Cave Adventures/Oxycheq Split crotch strap
4. Primary 1st stage: Zeagle Flathead 7 DIN
5. Primary 2nd stage: Zeagle Z
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog
8. Hoses: Braided/MiFlex
Warm Salt Water/Travel Rig
1. Backplate: Oxycheq SS "Wishbone" Plate, or Oxycheq Soft Plate
2. Wing: Oxycheq 18# Extreme
3. Harness: Oxycheq Hogarthian w/soft 1.5" crotch strap
4. Primary 1st stage: Zeagle Flathead 7
5. Primary 2nd stage: Zeagle Z
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog
8. Hoses: Braided/MiFlex
Double Hose Setup
1. Backplate: VDH Double Hose Aluminum Plate (flat version)
2. Wing: Either Oxycheq 18# or 30#
3. Harness: Dive Rite Basic Hog Harness w/ 1.5" soft crotch strap
4. Primary 1st stage: DAAM/HPR/Phoenix remastered by VDH
5. Primary 2nd stage: ^^^ plus a DSV
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog unless using J-Valve Tanks
8. Hoses: Braided/MiFlex
I use Oxycheq mesh trim weight pouches on my cambands regardless of the setup.
I would have a new computer by now but I still cannot decide whether to get a Perdix AI or a Teric. Leaning toward Teric. Also considering a Freedom Plate to try.
1. Backplate: DGX SS Plate w/Oxycheq 2-piece STA and DR Roller Cambands
2. Wing: Oxycheq 30# Extreme
3. Harness: Dive Rite Basic Hog w/Cave Adventures/Oxycheq Split crotch strap
4. Primary 1st stage: Zeagle Flathead 7 DIN
5. Primary 2nd stage: Zeagle Z
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog
8. Hoses: Braided/MiFlex
Warm Salt Water/Travel Rig
1. Backplate: Oxycheq SS "Wishbone" Plate, or Oxycheq Soft Plate
2. Wing: Oxycheq 18# Extreme
3. Harness: Oxycheq Hogarthian w/soft 1.5" crotch strap
4. Primary 1st stage: Zeagle Flathead 7
5. Primary 2nd stage: Zeagle Z
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog
8. Hoses: Braided/MiFlex
Double Hose Setup
1. Backplate: VDH Double Hose Aluminum Plate (flat version)
2. Wing: Either Oxycheq 18# or 30#
3. Harness: Dive Rite Basic Hog Harness w/ 1.5" soft crotch strap
4. Primary 1st stage: DAAM/HPR/Phoenix remastered by VDH
5. Primary 2nd stage: ^^^ plus a DSV
6. Computer: Need a new one (will be Teric or Perdix AI)
7. SPG: 2" DGX or Hog unless using J-Valve Tanks
8. Hoses: Braided/MiFlex
I use Oxycheq mesh trim weight pouches on my cambands regardless of the setup.
I would have a new computer by now but I still cannot decide whether to get a Perdix AI or a Teric. Leaning toward Teric. Also considering a Freedom Plate to try.