Deep 6 Signature turret?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

reefrat

Contributor
Messages
573
Reaction score
221
Location
Houston Texas and Grand Turk
A quick question for D6 Signature first stage users- the turret end looks to be only slightly longer than the diaphragm end of the first stage so do you use it (single tank) with the turret inverted or upright?
 
You keep the rotating turret up so that it can swivel fully. If you have the rotating turret down it can't swivel much because the hoses hit the tank.
 
I use primary donate with my primary routed under my arm, so the turret goes down and canted to my right with my primary hose coming out the end. My necklaced secondary hose still has a good range of turret rotation available, likely about 60 degrees before it or the LP inflator hit the tank. More than enough to be where I want them. But LP goes left, secondary right.... It seems my wing is more in the way of rotation than the tank. No tank in front of me for more exact rotation.
 
A quick question for D6 Signature first stage users- the turret end looks to be only slightly longer than the diaphragm end of the first stage so do you use it (single tank) with the turret inverted or upright?

Upright so that the Deep6 logo is pointing up. The logo becomes convex when the first stage is pressurized, which is handy to see.
 
It's really just a personal choice. With the turret up there is more rotation available but how much do you need. Decide for yourself which you prefer.
 
Upright so that the Deep6 logo is pointing up. The logo becomes convex when the first stage is pressurized, which is handy to see.
If you are relying on that to see if your gas is on please make sure you can reach your valve.
 
If you are relying on that to see if your gas is on please make sure you can reach your valve.

It's just a nice visual cue. I didn't know it was a feature, asked about it, and was told it was, and not something wrong with my first stage.

I mainly watch it after closing the valve and seeing if I purged the second stages enough, after a dive. I've seen people close their valves, not purge enough and get a "pop" upon disconnecting their first stage. They purged, just not enough.
 
Thanks for the responses.
The Signature first stage is a diaphragm but looks more like a piston with a turret (like the mk5/10/20/25 Scubapro's etc), usually with these piston units the turret is a bit high and hits the back of the head so people tend to use them with the turret downwards. The Signature looks tome like there would not be much difference whichever way it was positioned and if I have a choice I prefer turret up!
I am looking at maybe the D6 Signature or the Hog DX1 (Apeks DST clone) and prefer the specs of the D6 but like the hose routing of the DX1.
 
I use primary donate with my primary routed under my arm, so the turret goes down and canted to my right with my primary hose coming out the end. My necklaced secondary hose still has a good range of turret rotation available, likely about 60 degrees before it or the LP inflator hit the tank. More than enough to be where I want them. But LP goes left, secondary right.... It seems my wing is more in the way of rotation than the tank. No tank in front of me for more exact rotation.

I use primary donate as well, does not cause any problems for me with the turret up. I also often run a 19cf Pony with a 2nd reg set on the right. When I do that I stuff my backgas alt in a pocket and put the pony reg on the necklace, the fully rotating turret makes this fit a little better.

But as others have mentioned it can work either way, play with it to choose which way works for you. Depending on which way you choose you may also have to play with the position of your tank. When I switched to the Deep6 signature from a smaller travel 1st stage (Cressi MC9) I had to move the tank down on the BC a little to keep my head from bumping it when lifted up and in trim.
 
I am looking at maybe the D6 Signature or the Hog DX1 (Apeks DST clone) and prefer the specs of the D6 but like the hose routing of the DX1.

D6 version (c/o Dive Gear Express) of DST/D1:
Deep Six DGX 1st Stage Regulator | Dive Gear Express®
dx-100001_1grid.jpg


There is also the D6 "Scribble" without the turret:
Deep 6 Scribble Series First Stage (DIN)
scribble_series_1st_din_1.jpg
 
https://www.shearwater.com/products/teric/

Back
Top Bottom