Info How to Choose a Regulator

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

How to Choose a Regulator

(an overview of features and their value)

One of the first pieces of equipment that every diver will acquire is a set of Regulators. This is one of the most critical pieces of your gear as it enables you to breathe underwater and are considered to be life safety equipment. A challenge for many divers is there are a huge variety of options to choose from. Beyond taking the advice of your dive shop’s sales staff, how do you make an informed decision? Cost is one factor, but is expensive always better? How cheap is too cheap? What features matter the most?
The sales staff have a compelling argument that you should not be too thrifty when purchasing your “life safety equipment.” This article will attempt to give you some more information about the different regulator designs and features you will encounter, and why those features may or may not have value. I won’t suggest specific brands or models except as examples of the different designs. After you read this article, I hope that you will be better informed about your options and can make an informed choice the next time you need to buy or replace your regulators.

What does a Regulator do?​

A Scuba Regulator delivers air to the diver while underwater and allows them to breathe. What is happening in these devices to make that possible? Let’s break down the components to highlight the requirements of a SCUBA (Self Contained Underwater Breather Apparatus) regulator system.
  • A scuba tank is a cylinder filled with compressed gas at far higher pressures than the 15 PSI (1 BAR) you breathe at sea level. A typical scuba tank will be filled to a pressure of between 2400 – 3500 PSI (165-240 BAR)
  • A 1st stage regulator connects directly to the tank, and its job is to reduce the pressure it contains down to approximately 135 PSI (9 bar) required to operate your 2nd stage regulator. It must dynamically adjust as the tank pressure drops from over 3000 PSI (200 BAR) all the down to just 200 PSI (14 BAR) or less. Once the tank pressure is below 100 PSI (6 BAR) it will be increasingly difficult to breathe, and maybe impossible unless you are near the surface.
  • A 2nd stage regulator connects to the 1st stage and delivers air directly to the diver. The 2nd stage input is at the ~135 PSI (9 bar) delivered by the 1st stage. It needs to further adjust the pressure of the air delivered to the dive to match the “ambient pressure” of the diver. At the surface this will be 15 PSI (1 BAR) and at 100 feet deep this will be 60 PSI (4 BAR), or 4 X sea level pressure. (100 ft / 33 ft) +1 ATM
Regulators need to provide breathing gas at a pressure that exactly and continuously matches the water pressure at your depth. At 100 feet you will have 60 PSI (4 BAR) of pressure squeezing on your chest and lungs. If you had a 100-foot-long snorkel you would not be able to breathe from it as your chest would be crushed and unable to pull in the air. If a regulator delivers more than the ambient pressure, then you would blow up like a puffer fish. Not good. The regulators must be precisely designed and tuned to deliver exactly the right pressure.

Full Regulator System​

A complete regulator system for standard open circuit recreational scuba diving consists of five essential components.
  • 1st stage regulator
  • Primary 2nd stage regulator
  • Backup 2nd stage regulator
  • Submersible pressure gauge
  • Hoses for the SPG, 2nd stages, and BCD/Drysuit
IMG_20220227_152525.jpg

What Features are Important and Worth Paying Extra?​

There are so many brands with such a wide spread of prices. It can be confusing to know what brand is best and how much should you spend. Within a single brand there can be a spread of prices from hundreds to thousands of dollars.
The reality is that pretty much every regulator being sold by a legitimate dive shop is going to be safe and reliable for standard recreational diving. The most expensive regulator is not going to keep you more alive than the cheapest one. It also may not be more reliable than the cheapest one. It might even be the case that the cheaper one will be more reliable over time than the expensive one.
The same is true with brands. Very often dive shops will have a relationship with a particular brand and might sell that brand more than another, and they probably don’t offer more than one or two of the top selling brands. In general, one brand is not better than another. Most brands have a range of models that vary from basic to fancy. As you scale up in price you get added features. Some are useful, some merely cosmetic, and some that aren’t valuable to everyone. We will cover different options and features in the next section, and I’ll call out some of the more important and useful features that you should look out for.

Serviceability is the #1 Feature 👍

The only comment I will make about Brands in this article relates to serviceability of your regulators. Every single regulator from the least expensive to the most expensive will eventually need to be serviced. After one or two years of use your regulators need to be serviced. If you skip service for a year or two longer you might get away with it for a while. But eventually every regulator will fail and need service. Most brands & models have a 1-3 year recommended service interval. Get your regulators serviced before they fail and start to have problems.
A 1st stage regulator is typically made of a solid chunk of chromed brass and filled with stainless steel springs, synthetic or rubber o-rings, seats, diaphragms, and other plastic parts. Eventually the o-rings will wear out, lubrication needs to be reapplied, and corrosion or grit will build up until the regulator starts to have issues. A regulator needing service might leak, the Intermediate Pressure might no longer be to spec, or could even dramatically blow a seal.
The one feature that you absolutely need to prioritize is: Can I get this regulator serviced, not just from the shop you bought it from, but you get it serviced anywhere in the world?
For most of the top brands of scuba gear, the answer to this question will be Yes. Brands like ScubaPro, Aqualung, Apeks, Atomic, Mares, Poseidon, Oceanic, etc. have parts and service centers all over the world. There are other good brands that might only be serviceable in North America or Europe. Any of these might be great options. Just make sure that you understand how to get your gear serviced wherever you live.
I strongly recommend that you avoid any brands that don’t have widely available service. I’ve seen many divers using regulators I could not identify. There are plenty of cheap regulators available online that are from unknown brands. Many of them are clones of more popular brands or model, and they might work just fine. But eventually they will need service, and if you can’t find a convenient shop to service them you will likely need to buy brand new gear. When a regulator needs service, you need to buy a “Service Kit” from the maker of the regulator. The kit consists of a complete set of o-rings, diaphragms, seats, and seals that experience wear in the regulator. Sometimes other parts break or wear out that are not part of the service kit. If your Brand can’t supply service kits and replacement parts, then no dive shop or service technician is going to touch it.

IMG_20220227_165825.jpg


Continued in the next post

 
You write with a lot of conviction, but are off the mark on several things.

First there is no problem with an octopus being different than the primary second stage. In fact it is a good way to save some money.

2nd a lot of the info you have about the air 2, the hoses, redundancy etc. seems to indicate that you are ignorant about the hoses and the availability of adapters that will allow quick switching from an air 2 hose to a standard inflator. Total cost is probably $30 for the adapter and the standard back up inflator combined. You don't need a different hose.

3rd, a cheap simple piston regulator without a swivel is almost certainly going to be more robust and require less frequent service than a facy regulator with more moving parts..

4th, the adjustment knob on a second stage has considerable benefit for allowing peak performance and manually turning it down when swimming into a current, for example, or continuing a vacation when the seat has gotten a little worn. This is a HUGE benefit in my opinion, yet you seem to miss the value of it.

That's probably enough.. I just skimmed the write up.
 
You write with a lot of conviction. I just skimmed the write up. That's probably enough..

Sure is, anyhow I didn't even skim the write up as I have many funny ideals all my own

But anyone that goes to the effort of compiling such a magnificent collection of words

is only a beautiful person

No matter what they say.
 
You write with a lot of conviction, but are off the mark on several things.
The problem with skimming is that your reading comprehension is degraded. You challenge several aspects of the article, but I make many of the same points in the article itself. You are welcome to disagree, but you can't dismiss that there are real pro/cons to each of this issues.

First there is no problem with an octopus being different than the primary second stage. In fact it is a good way to save some money.
Yes, of course you can save money buying a cheap octopus. As discussed, you are buying an inferior octo for use specifically when a diver is going to be the most stressed and needs a solid well performing regulator. You lose redundancy and complicate servicing.

2nd a lot of the info you have about the air 2, the hoses, redundancy etc. seems to indicate that you are ignorant about the hoses and the availability of adapters that will allow quick switching from an air 2 hose to a standard inflator. Total cost is probably $30 for the adapter and the standard back up inflator combined. You don't need a different hose.
You are just reinforcing my arguments against Combo Regs. You need to load up on extra, special purpose parts, adapters, hoses, etc. You may lose use of your BC as well if your Combo fails.

3rd, a cheap simple piston regulator without a swivel is almost certainly going to be more robust and require less frequent service than a facy regulator with more moving parts..
I make this exact point in the article. For some situations a super simple piston is the right tool for the job. That said, these are not the best regulators in terms of performance and the cost savings are minimal.

4th, the adjustment knob on a second stage has considerable benefit for allowing peak performance and manually turning it down when swimming into a current, for example, or continuing a vacation when the seat has gotten a little worn. This is a HUGE benefit in my opinion, yet you seem to miss the value of it.
I agree, and make similar points in the article. An adjustment feature can be very useful. But it is not a must have feature. It won't make the regulator breath better if it's well tuned. It's an upsell capability that is nice to have.
That's probably enough.. I just skimmed the write up.
Thanks for the reply and please let me know if you come up with more!
 
I am looking to acquire my first reg set and this article has helped a great deal to organize my thoughts. Thank you very much.
Super! That's exactly what I wrote this for. To help new and non-gearhead divers learn about the features and value of the blinding array of options they have to choose from.

Cheers,
Dave
 
Super! That's exactly what I wrote this for. To help new and non-gearhead divers learn about the features and value of the blinding array of options they have to choose from.

Cheers,
Dave

I must say, you did an admirable job. Thanks. It isn't easy to be so objective.
 
So everyone needs to get a titanium regulator, second stages with adjustment knobs, an octo inflator for redundancy to the redundant octo and a Spare Air...:)
 
The first Doria "recreational" (not a commercial operation) dive was in 1966 and used unbalanced double hose regulators, no pressure gauges, no bc, they claim no depth gauges, obviously no computers, and a bunch of 72 cubic foot cylinders.


so we now quibble about buying "high end" dive gear to be safe.... In recreational diving...

LMAO....
 
https://www.shearwater.com/products/swift/

Back
Top Bottom