@tbone1004 So you would use that one instead of the omni-swivel because of the price difference? But if they were both $50, you'd choose the omni?
22" or 24" primary regulator hose?
- Thread starter flybigjet
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 20,561
- Reaction score
- 14,946
- # of dives
- I'm a Fish!
if the omni was around $40 and the other was $25, I'd probably buy the Omni, but since they're $85/$25, it's the cave adventurers. I think I paid $30 each for my omni's which was a no brainer, but that was a closeout sale and bought I think 12 of them at the time. A bit impractical for most people, but all of mine are in use
OP
flybigjet
Contributor
Disregard. I answered my own question.
In other news, I did some measuring with a tank, my bc and primary. There's no way an 18" hose would work; 22" was a little tight looking left, and 24" seemed to be just about right.
So, I'll be running a 40" underarm hose for my primary reg and a 24" hose for my backup.
Thanks again to all. Very much appreciated.
R.
In other news, I did some measuring with a tank, my bc and primary. There's no way an 18" hose would work; 22" was a little tight looking left, and 24" seemed to be just about right.
So, I'll be running a 40" underarm hose for my primary reg and a 24" hose for my backup.
Thanks again to all. Very much appreciated.
R.
Last edited:
Similar threads
