kafkaland
Contributor
I can't find anything on version F either.
Is there any way to get dive time/bottom time/whatever you want to call it on the main screen rather than having to go through another menu to see it? As an instructor, in low-viz murky,silty, and dark water, I want to be able to glance quickly at my computer rather than having to mess with menus to see this information.
Agreed. I usually look for dive time information at my backup computer (that I still need because the A300 is a bit flaky - the compass problem, for instance, still isn't fixed!) instead of going to the secondary screen. The normal dive mode screen could use some work besides that. I would like to have it display "32%" or whatever instead of "gas 1" - one more opportunity to catch an error in the gas setting. And I don't know why they have added the battery status permanently to that screen in a previous firmware update. I need to know only when it's getting low, but don't need to watch it constantly to make sure it's still green. Finally, I would like to have an indicator whether I'm on-gassing or off-gassing, like a time derivative of the nitrogen gas loading bar. This would tell me if a deep stop is helpful, or not.