citric acid for cleaning

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

dinogep

Registered
Messages
26
Reaction score
0
Location
Budapest, Hungary
# of dives
500 - 999
I have tried to use 1.5% citric acid solution (plus a little detergent) for the cleaning of regulator parts in the ultrasound cleaner. I have set the concentration so that the pH is roughly equivalent to the 2.5% acetic acid solution that is normally used. I expected the citric acid to behave the same as the vinegar, but without the smell. Near to those places however where the plating was damaged originally, and a lot of green corrosion product was visible, the dissolved copper cemented on the surface of the intact chrome plating. The cementing itself is not very surprising based on the standard potentials of the metals involved, however I have never seen it this obviously when I was using acetic acid. Maybe the reason is that the acetic acid removes the protecting oxide layer from the top of the chrome plating, activating the chromium, but before I go into more wild speculation, I would like to ask whether anyone else has seen this phenomena with any kind of cleaning solution? Or maybe this is only the result of the excessive amount of corrosion products?
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom