• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Coltri MCH 6 question/ advice appreciated

Discussion in 'Compressors, Boosters and Blending Systems' started by Tony Prcevich, Jan 26, 2020.

  1. Tony Prcevich

    Tony Prcevich Angel Fish

    # of Dives: 100 - 199
    Location: Vanuatu
    8
    2
    3
    Thanks for all the advice, I do appreciate it. I have now located the user manual and am having a good read. I cannot see anything about the duty cycle and cool down of the compressor, but, don't think I will be redlining it anyways.

    I did look at the filtertechs site but the postage is a bit crazy. We will see how we go re-packing first. Good idea with the indicator strip. Looks like you can buy indicator strips off ebay as well, so could be an option when re-packing.

    @SurfLung I got dejavu when reading about you spilling oil onto your nice new clean compressor.

    I will slow down on the purging and will only drop out the water. Should save sometime.
     
    SurfLung likes this.
  2. Edward3c

    Edward3c Instructor, Scuba

    1,457
    637
    113
    I run a petrol driven MCH 6 and happily pump cylinders, to 300bar, for 3 hours, only stopping to refuel.

    I bleed the system every 10 minutes, just enough to expel the water.
     
    SurfLung likes this.

Share This Page