Gone for diving
Contributor
Probably an older manifold. Is the problem...
Newer ones probably have a bigger hole...
Newer ones probably have a bigger hole...
Doubles manifold leak
- Thread starter MaxE
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
MaxE
Contributor
The DIN nipple (this is what it’s called in the atomic service manual) has slightly larger diameter on this reg vs two other atomics I just measured. Replacing is going to be easiest. I’m headed to see if I can just replace the nipple or will I need a full DIN assembly.
Thank you @Gone for diving for you help
Gone for diving
Contributor
The only disadvantage is that an other regulator may have the same problem....
Probably from the era that nobody had standardized din measurements...
Probably from the era that nobody had standardized din measurements...
happy-diver
Skindiver Just feelin it
- Messages
- 5,326
- Reaction score
- 4,790
- # of dives
- 2500 - 4999
Just drill it out with everything assembled resurface the face then crack the valve to blow out the swarf
Gone for diving
Contributor
Is that the tool for the job?
Never seen one....
I myself probably would just drill it on the tank...
But I figured this is scubaboard, and
People will lose their minds.
happy-diver
Skindiver Just feelin it
- Messages
- 5,326
- Reaction score
- 4,790
- # of dives
- 2500 - 4999
That would be some avalanche
Similar threads
