Mobius1
Registered
i just bought a 13 cubic foot pony bottle and am considerin getting a titan as the reg for that any thoughts or ideas?
Good quality Regulator for a 13 cu.ft pony bottle
- Thread starter Mobius1
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Maybe have a look at the Apex TX-40/DS4 combo.
OP
Mobius1
Registered
yea ill have a look at that but cost is an issue considerin i only get 34 dollars a day for workin at the farmers market every wensday and even thats in-frequent.
toodles
Contributor
I would recommend the Apeks AT20 regulator.
Very nice performing reg.
Breathes great.
Very well priced.
Good Luck
Very nice performing reg.
Breathes great.
Very well priced.
Good Luck
Only trouble with either of these being among my choices is a lack of environmental seal on the first stage.
Mind you the water temp here on my dive yesterday was 46F and that's down 6F from last week and we aren't even into winter yet.
Mind you the water temp here on my dive yesterday was 46F and that's down 6F from last week and we aren't even into winter yet.
Also prefer to have some sort of mechanical adjustment to detune the reg while it's just hanging around waiting to be breathed.
R_Deluca
Contributor
I recommend and use the ATX50/DS4 combo for all my stage/pony bottles!
Whilst I'm not sure that it is the same on the other side of the pond, but the AT20 and the ATX50 mentioned here are usually sold with either the DS4 or the DST first stage.
Both of these are dry dealed. The unsealed first stages are the US4 or UST.
HTH
Jon T
Similar threads
