I bought a complete fill station a few years ago. I had to do some reorganizing of the garage, so the assembly of the fill station fell on the back burner. I am now trying to get it back together.
From my notes and pictures, and help from the previous owner, I was able to reconstruct the system on paper. After looking at it, I wanted to simplify it. Thanks Wookie for the help and pointers along the way.
Here are the main components used:
Let me know what you think.
Thanks for looking.
From my notes and pictures, and help from the previous owner, I was able to reconstruct the system on paper. After looking at it, I wanted to simplify it. Thanks Wookie for the help and pointers along the way.
- I wanted to reduce or remove the use of Quick Disconnects.
- I wanted to reduce the amount of tubing and fittings exposed to O2.
- I want to reduce the amount of flex hoses used.
- I wanted to use a shop air compressor rather than using banked gas to drive the Haskel.
Here are the main components used:
- Bauer Capitano ~5cfm
- Four 4500 psi storage bottles
- Two 3600 psi storage bottles
- Three 2400 psi O2 bottles
- Haskel AG30
Let me know what you think.
Thanks for looking.