Hollis Prism 2 rigid tank mount

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I know this thread is a bit old but was curious to see if @telemonster actually made the mounts or found a better solution to have a hard mounting of the cylinders to the H-frame? Any help would be appreciated. Thanks
 
I know this thread is a bit old but was curious to see if @telemonster actually made the mounts or found a better solution to have a hard mounting of the cylinders to the H-frame? Any help would be appreciated. Thanks
I used the dive rite 1.5" wide cambands myself. They're available in CCR bottle length too so you don't have a massive extra tail.

I use them to hold lp50's on the factory h plate.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom