When I had a console, I used a bolt snap on a bungee to clip it to the lower left chest ring on my BDC. The snap stays in place until it's time to remove the reg set from the tank. There is no need to unclip when doning/doffing the BCD whether under, on or out of the water. When the console broke I replaced it with a simple pressure gauge, secured the same way. Plastic clips are trash. Use a stainless steel bolt snap.
BTW I bought the 2 regs + one 1st stage + console set as a new diver. In retrospect I would never again buy a console, just the pressure gauge. You miss nothing by not having the kind of cheapo depth gauge consoles typically feature, and it's a really inconvenient location for a compass.
BTW I bought the 2 regs + one 1st stage + console set as a new diver. In retrospect I would never again buy a console, just the pressure gauge. You miss nothing by not having the kind of cheapo depth gauge consoles typically feature, and it's a really inconvenient location for a compass.