Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Ability to post and comment on topics and discussions.
A Free photo gallery to share your dive photos with the world.
Oh sorry I wasn’t to clear. I have the adapter that sits on the top already that attaches to the yoke. I just need a new valve to be able to hook it into. That one above kinda had it all but I asked the scuba shop and he said he would need to make a adjustment to his fill whip to make it work. So I’m going different route. And try and find the valve.
My 3,500psi tanks have the 7/8" neck thread, which is smaller in diameter than the usual 3/4" thread, despite the fractions themselves indicating otherwise. The numbers are from two different systems of measurement & do not compare directly. My 7/8" valves accept DIN only & can't be used with the little inserts that convert most modern DIN valves to be compatible with yoke regulators.
Oh sorry I wasn’t to clear. I have the adapter that sits on the top already that attaches to the yoke. I just need a new valve to be able to hook it into. That one above kinda had it all but I asked the scuba shop and he said he would need to make a adjustment to his fill whip to make it work. So I’m going different route. And try and find the valve.
I regularly use a DIN to Yoke conversion adapter on my steel PST tanks to test and tune my yoke dive equipment prior to travel. I do not dive these tanks using the insert, that would not be safe. I dive them using DIN regulators. But for paintball air transfers the insert should be fine.
I will check, but I use something similar to the XS-Scuba DIN Filler adapter. It does work for this purpose.
FYI: For future Hydro, note the Pressed Steel Tanks require a special permit authorization which has been updated periodically for the past 10 years. Currently authorization is good until 9/30/2022:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.