Just read through the Peregrine manual but didn't see anything about setting the depth of the safety stop.
Can you set the depth?
Thanks!
Can you set the depth?
Thanks!
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
I assume this is in the Perdix Rec mode? Are you saying you cans set the safety stop depth, or just its duration?Any chance the Peregrine will be the same as the Perdix in that regard, where you can set it yourself and even turn it off completely?
To what would you set it?
Whatever I like, depending on dive site topography and surface conditions. Typically between 10-25 fsw (3-8 m).
That makes sense but I see, in one video, that the computer's menu system shows a "10 ft" safety stop setting as if it's configurable, but there is no example or information on the selections.
Waiting to hear what Shearwater says...
I think you'll find on the Perdix Rec mode, and I'll bet the Peregrine is the same, that only the duration can be set. The safety stop depth is anywhere between 7 and 23 ft, Shearwater doesn't care where you do it. There is nothing to set for depth; the safety stop (if you have it set to have one) turns on when you exceed 35 ft, and then begins its countdown once you get back above 20 ft.Whatever I like, depending on dive site topography and surface conditions. Typically between 10-25 fsw (3-8 m).