BigRed96
Contributor
I’m looking to purchase a VDH Phoenix first stage to upgrade my DA Aquamaster. Thanks for looking.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Do I remember you having a long yoke on your dh? You could consider using a cyclone rather than a phoenix, and then a banjo for pressure. A hooka port adapter and a splitter gives you an octo and an lpi port. I have two set up this
You do want to put in an HPR, new single stage diaphragm, and the dbe.
Good luck, and have fun! It may take a bit for the next run of the phoenix units. Cyclone is a fine option, and economical..
I’m not sure on the long time as I haven’t received it yet. After I receive it I might still not know as I’m new to these dh regs. Here a pic from the auction, maybe you can tell.Do I remember you having a long yoke on your dh? You could consider using a cyclone rather than a phoenix, and then a banjo for pressure. A hooka port adapter and a splitter gives you an octo and an lpi port. I have two set up this way.
You do want to put in an HPR, new single stage diaphragm, and the dbe.
Good luck, and have fun! It may take a bit for the next run of the phoenix units. Cyclone is a fine option, and economical..
Do I remember you having a long yoke on your dh? You could consider using a cyclone rather than a phoenix, and then a banjo for pressure. A hooka port adapter and a splitter gives you an octo and an lpi port. I have two set up this way.
You do want to put in an HPR, new single stage diaphragm, and the dbe.
Good luck, and have fun! It may take a bit for the next run of the phoenix units. Cyclone is a fine option, and economical..
Looks like a long yoke to me!Here’s a side shot of the yoke
That's the soft goods gamble... mostly expected. Duckbills here: About Us Or a duckbill eliminator here: Store | Vintage Double HoseUnfortunately when removing the exhaust side hose, what appears to be the duck bill fell to pieces.
See Rob at The Scuba Museum again: About UsI’m also having trouble locating a banjo fitting
I had difficulty finding a Hookah port adapter as well, so I went a non-standard route with an LP manifold block and liberal use of teflon tape, see this thread: Starting down the DH rabbit holeAlso could someone send me the right direction for the adapter for the hooka to lp hose?