00wabbit
Contributor
Hi,
I have been working on this Goodman style handle that was originally intended to fit the DRIS 500 and 1000 lights. Through the progression of the design I was able to make it fit any cylindrical flashlight from 1" to 2" diameter.
I have tried to make this as cost effective as possible so that it is accessible to as many divers as possible. The reason I started the project is because I want one for myself and it is too expensive to just make one. By making 100 of these I can bring the cost down on each individual unit.
I am using indiegogo for the preorders. If I reach my goal on indiegogo then production will begin. If I do not reach my goal then all money will be refunded and I will not produce the handle.
Here is a link to the campaign if you would like to pick one up: Goodman Style Handle for Scuba Flashlights | Indiegogo
Here is the original scubaboard thread that shows the design process and all the thought that went into the project: http://www.scubaboard.com/forums/li...oodman-style-handle-dris-1000-500-lights.html
And here are some renderings of what I am going to make!
The construction is anodized aluminum with stainless steel hardware. It uses button head hex screws and nylon insert locknuts. All the hardware is user replaceable incase of corrosion or if it gets stripped. The flashlight connection is detachable so other accessories can be attached to the handle in the future.
As shipped the handle will fit 1" -1.5"diameter lights. This will allow it to comfortable fit the DRIS 500 and 1000 lights as well as lights with a smaller diameter. To fit a larger diameter (up to 2"diameter) light you will need to purchase longer 3" screws yourself.
The price is $38 + $5.20 for shipping in a USPS small flat rate box. If you buy 2 I can combine the shipping on them.
Remember this is a pre-order. The production will be complete approx. 30 days after I reach my goal on indiegogo.
Note to mods: I'm not a commercial manufacturer. This is more of an advanced DIY project.
I have been working on this Goodman style handle that was originally intended to fit the DRIS 500 and 1000 lights. Through the progression of the design I was able to make it fit any cylindrical flashlight from 1" to 2" diameter.
I have tried to make this as cost effective as possible so that it is accessible to as many divers as possible. The reason I started the project is because I want one for myself and it is too expensive to just make one. By making 100 of these I can bring the cost down on each individual unit.
I am using indiegogo for the preorders. If I reach my goal on indiegogo then production will begin. If I do not reach my goal then all money will be refunded and I will not produce the handle.
Here is a link to the campaign if you would like to pick one up: Goodman Style Handle for Scuba Flashlights | Indiegogo
Here is the original scubaboard thread that shows the design process and all the thought that went into the project: http://www.scubaboard.com/forums/li...oodman-style-handle-dris-1000-500-lights.html
And here are some renderings of what I am going to make!
The construction is anodized aluminum with stainless steel hardware. It uses button head hex screws and nylon insert locknuts. All the hardware is user replaceable incase of corrosion or if it gets stripped. The flashlight connection is detachable so other accessories can be attached to the handle in the future.
As shipped the handle will fit 1" -1.5"diameter lights. This will allow it to comfortable fit the DRIS 500 and 1000 lights as well as lights with a smaller diameter. To fit a larger diameter (up to 2"diameter) light you will need to purchase longer 3" screws yourself.
The price is $38 + $5.20 for shipping in a USPS small flat rate box. If you buy 2 I can combine the shipping on them.
Remember this is a pre-order. The production will be complete approx. 30 days after I reach my goal on indiegogo.
Note to mods: I'm not a commercial manufacturer. This is more of an advanced DIY project.