Closed PST HP100

[wasabean]

Are you planning to turn these into doubles? Also I assume you know these are DIN-only tanks.

yes, I will be using DIN

 

[Kensei]

The tank is an E9791. The valve on this tank will not accept a manifold if you're planning on doubling them. Is that a problem? The valve is for single tank diving.

 

[wasabean]

The tank is an E9791. The valve on this tank will not accept a manifold if you're planning on doubling them. Is that a problem?

not a problem, I will have to get new valves, manifolds and bands. and yes, my tank is also E9791

 

[wasabean]

The tank is an E9791. The valve on this tank will not accept a manifold if you're planning on doubling them. Is that a problem? The valve is for single tank diving.

I just noticed that the service pressure is different. mine is 3442 and yours is 3500. I'm trying to see what the differences are (aside from the obvious)

 

[Scuba Skip]

3442 is a 3/4" neck. 3500 is a 7/8" neck with a 300 bar only only.

 

[wasabean]

3442 is a 3/4" neck. 3500 is a 7/8" neck with a 300 bar only only.

ahh thanks for the details!

 

[runsongas]

good news is you don't have to go buy an expensive 3500 psi 7/8 unf manifold. the bad news is you have to now look for a matching 3442 psi PST E7-100.

 

[SeaKatt]

I have 4, but I'm in Milwaukee, WI or Fort Collins, CO. They are in hydro and have straight 300 valves. I also have a manifold, bands and a doubles wing if you're interested in a shipping situation.

 

[wasabean]

I have 4, but I'm in Milwaukee, WI or Fort Collins, CO. They are in hydro and have straight 300 valves. I also have a manifold, bands and a doubles wing if you're interested in a shipping situation.

Hi. Yes. I only need 1 of the tanks. I’m not sure if you have them doubled up or not. I’d be interested in a shipping situation if the total cost is within reason. Can you provide pictures of the tank marking please? Need to make sure they match with mine.

 

[napDiver]

I'm actually in the process of cleaning out and selling about 10 tanks. I'm in long beach.

Lmk if your interested. We can discuss pricing and other details if you are.