johnnyblackau
Contributor
Hi... I have a Suunto D6 (not the D6i) - Is the USB cable from the D6i, D9TX, DX, etc. all compatible with the D6 or does it require a specific cable?
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Hi,
sorry for the late respond here:
- the mentioned cable is compatible with the D6 too.
- the bat info shows the voltage: below 2.6 will show "low" / below 2.4 will show "replace" and diving mode can't be entered
br Hendrik
Hi Chris
I have a D9Txi titainium which is a great unit i bought it because of my history with Suunto is great i dive every day (my job)
i have one thing which is driving me NUTS!!!!! deep stop on nitrox diving you can not swich it off i k now you can switch it off in Air mode
the old D9 was great you had the option to switch the deep stop function off which was GREAT!! i was told this was not ment to be like that
my question is is there any way i can turn the deep stop function off in nitrox mode PLEASE
our diving sites have a 50ft from surface to the top of the wall so we go over the wall down to 80 ft then at the end on the way back i have to to a 1-2 min deepstop 10ft above the wall mid water away from my guest s such a pain ! can you help please?