Question re: Discovery repair

[lemon]

Help!

While setting up and assembling my own Discovery Rebreather I noticed that one of the oxygen safe o-rings on the cylinder pressure sensor was torn and needs replacing. Its the oring on the outside aspect of the sensor at the tip of my finger below.

Is this something I can replace on my own or does the whole electronics block need to be shipped back for servicing? :shocked2:

Thanks!

 

[Jorgen Nilsson]

You can fix that your self. Contact the dealer/center where yo bought your unit and they should be able to provide you with the correct o-ring.

All you need to think about, is to avoid handling those o-rings with your fingers. Use a glove to avoid getting grease on the o-rings.