SI TECH Quick Dry Glove System

[riguerin]

Complete Si Tech Quick Dry Glove System including size M gloves. System has been assembled but has never been wet. All items are in like new condition. The following items are included in the kit:

• 2ea Quick Clamp - Docking ring installed on outside of suit latex seal (Qclamp)
• 2ea Connecting Ring - Comfort ring installed on glove. Allows easy user donning/doffing. Includes o-rings.
• 4ea Blue Spanner Rings - Standard thickness glove/seals.
• 2ea Black Spanner Rings - Extra thickness glove/seals.
• 2ea Yellow Spanner Rings - Thick seals
• 2ea Green Spanner Rings - Very thin seals.
• 2ea Spare O-Rings
• 2ea Silicone Hose - Under seal for pressure equalization
• 2ea User's manuals
• 2ea Latex Gloves - Showa no. 495-8/M (size medium/no liner)

Asking $80 which includes shipping to Continental US.

 

[RonzoTheGreat]

just to clarify, this is the older model that takes a few turns to screw shut as opposed to the newer 1/4 turn ones right? either way it is a good deal, just want to be sure.
thanks

 

[riguerin]

To be specific, this the SI TECH Quick Dry Glove Docking Combo Set, Art. #60940. It includes #60230 Quick Glove rings and #60930 Quick Clamp.

To facilitate doffing, the glove side Comfort Ring incorporates a threaded release ring that is twisted until the connecting ring separates from the suit attached docking ring. Yes, it usually takes a turn or two.

The following manufacturer's video shows the kit components in greater detail and illustrates how to assemble and install kit.

 

[GTaylor]

Was wondering if this is still available? And if so do you take paypal?

 

[riguerin]

Was wondering if this is still available? And if so do you take paypal?

Yes and yes. PM sent

 

[riguerin]

Item IS SOLD ! Thanks SB.