I talked to a diver that just uses dish washing gloves pulled over his DUI drysuit cuffs. I am going to try this but I was curious if anyone has ever tried inserting a rigid ring in the cuffs of a DUI drysuit behind the sip seals to 100% make sure the cuffs stay round so you can use a more cost effective drysuit glove. Very curious what peoples DIY, DUI glove setups are. The guy I talked to says the cuff stays round with a stretchy type glove but I would feet better with some sort of DIY rigid ring in there either a cut piece of PVC or a 3D print something. I really dont want gloves built into my drysuit and would like something I could pull op and over the cuff.