Suunto Gekko - Dive Download ????

[Firefyter]

One question, does this patch work with the latest version of SDM (2.6)?

Yes. It's not a software patch, it actually changes a bit in the firmware of the computer, so it makes no difference what version or program you use.

 

[Marxous]

The link to this program no longer works, if someone could help me out i would really appreciate this. I just picked one up today! Thanks all!

-Marc

 

[guggie]

The link to this program no longer works, if someone could help me out i would really appreciate this. I just picked one up today! Thanks all!

-Marc

Try this:

Untitled Document

 

[Marxous]

wow, nice link! thank you, now all i need is the cable

 

[guggie]

USB PC Interface for SUUNTO Vytec Cobra Vyper Mosquito - eBay (item 140307788081 end time Mar-21-09 14:56:10 PDT)

 

[Bappelt]

I have a USB cable from Custom Idea and the drivers have been loaded.

I have tried downloading my Gekko to Dive Log 4.0 and SDM via the Gekko2Vyper program.

Both programs recognize the COM port assigned to the cable but neither one make the connection to the Gekko.

I've tried cleaning the contacts, I've unininstalled and reinstalled all the various software programs. I've even tried two different laptops. Still no luck.

Yes the Gekko is on and set at PC Set.

Any help would be appreciated.

 

[CFDAlden]

From the steps you listed, you didn't convert the Gekko to Vyper.

Could that be it?

 

[Underwater Ogre]

From the steps you listed, you didn't convert the Gekko to Vyper.

Could that be it?

How long does the conversion take? I run it and it says "beginning procedure" then does nothing...I started the DM and its telling me it can find the DC. I think I will re load all the software and try it again.

 

[hdugan]

How long does the conversion take? I run it and it says "beginning procedure" then does nothing...I started the DM and its telling me it can find the DC. I think I will re load all the software and try it again.

My version takes about 6 sec.

The program reports:

"Ready - Check Conversion Type"
(I then press DoIt and get)
"Begining Proceedure"
"Device Found"
"Setting Computer Type"
"Finished"

 

[Bappelt]

From the steps you listed, you didn't convert the Gekko to Vyper.

Could that be it?

It won't convert. Like the other poster is says starting procedure but never finds the DC.