Will this be safe to dive?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I got a little work done today.
Very nice. But you ain't getting away that easy. Let's hear about the process. First, sandblasting, then.....

This is worthy of it's own thread in the DIY section.
 
Very nice. But you ain't getting away that easy. Let's hear about the process. First, sandblasting, then.....

This is worthy of it's own thread in the DIY section.
Will do. I need to get back out to my lair to take some pictures of the tools I used, then I will do a write up.
 
Glass bead.. sand is way to rough...

Jim..
 
Yes, was wondering if sand blasting might pit the brass..

In fact if you had a way to use baking soda in your cabinet, that's one of the softest to use....

Jim..
 
I used glass bead and noticed no pitting other than the pit already in the brass from corrosion.

Glass beading is the smallest medium I can use in my cabinet.. I have a soda blasting unit on my wish list...

Jim..
 
Like it... Just put it in my blast cabinet when needed.. thanks for the info..

Jim..
 

Back
Top Bottom