Framed or Frameless Mask

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Was looking around and found this thread. Thought I was pop in. Been diving for a couple years but never owned a mask. I've tried many rentals looking for one that was comfortable but to no avail.

The problem is that I have protruding brow (my kids call it the neandrathal brow). When I get to depth the mask frame presses against it and it's quite painful over time. Usually very sore after a dive. Anyway...i was on a dive last year while on a cruise and I mentioned it to another diver who used told me about frameless masks (don't remember which kind he had). He let me try it on and it was very comfortable.

When I got home I started looking around and settled on a Cressi F1. Hey, what can I say, I'm cheap. I've now had 10 dives with it and am very pleased. No pain, very comfortable, no leaks, no fogging. I'm a happy camper.
 
Was looking around and found this thread. Thought I would pop in.
Same here. :)
The Dive Gear Express frameless has been a great mask for me. When I got it last year it was $35. Should have bought four of them. Would make great gifts for diving friends/family. They've since gone up to $45 but a great deal at that price still considering others that look identical out and are $100+ Looks the same as the XS Scuba, Dive Rite, and XDeep mask. I'm guessing just sourced from the same OEM and sold cheaper.

ETA: The DGX mask also does a great job of sealing even with a mustache. I tend to dive a Sherwood Oracle+ for the gauge reader inserts. However, with the Sherwood I need to either apply some lanolin to my mustache right under my nose or trim it down a schooch under my nose to get a proper seal. Otherwise I spend the dive constantly clearing a flooded mask. The DGX, however, seals just fine by itself. I'm going to see if I can use my vision plan to cover having inserts added to it as I much prefer it. The Trident inserts are good but the adhesive is crap and hazes up and ultimately come loose diving in the summer.
I'm considering the DGX Frameless mask and it's good to read your comments. Question: DGX strongly advises using toothpaste or a lighter to remove any film prior to use. Here is from their website:
Don't use toothpaste as an abrasive cleaner on modern dive masks, especially those masks that have optical quality ultra-clear glass lenses, vision correction lenses or 'optical coatings' on the lenses. You will either damage the lenses, or needlessly waste toothpaste since most modern toothpaste formulations are not at all abrasive. The same goes for using a lighter to 'burn' the lens to prepare a new mask. Dive Gear Express will not warranty masks that have been treated with abrasives or burned with lighters.
What should I apply to the mask, other than my homemade defog (baby shampoo/water mixture) prior to the first dive?
 
Same here. :)

I'm considering the DGX Frameless mask and it's good to read your comments. Question: DGX strongly advises using toothpaste or a lighter to remove any film prior to use. Here is from their website:

What should I apply to the mask, other than my homemade defog (baby shampoo/water mixture) prior to the first dive?
Working some dish soap with a microfiber cloth on the inside of the lens isn't a bad idea regardless. The advice against using toothpaste or lighters is more for lenses that have a factory applied film, and the toothpaste might scratch that coating. Colgate or Crest aren't going to scratch a glass surface itself. I've never had problems using toothpaste on the initial cleaning, but I don't use UV or mirror coated lenses, just clear glass like xdeep and uncoated apeks goggles.

toothpaste bad:
1713823733303.png


toothpaste good:
1713823756076.png


toothpaste bad:
1713823778325.png
 
Same here. :)

I'm considering the DGX Frameless mask and it's good to read your comments. Question: DGX strongly advises using toothpaste or a lighter to remove any film prior to use. Here is from their website:

What should I apply to the mask, other than my homemade defog (baby shampoo/water mixture) prior to the first dive?

I used a lighter for my mask.

I recently purchased a Tusa Zensee Pro. It's a much more expensive mask, (about an extra C-note) but I got it for the UV-whatnot filtering lens. It also has an anti-reflective coating to help with light transmission. Used if for the first time DM'ing some OW students at the lake. Easier on the eyes while spending time on the surface. Clarity underwater was good. I suppose when the temperature warms up a scooch more and I'm not wearing a hood I'll compare the two underwater donning and doffing them back and forth to see if the anti-reflective coating actually helps underwater. Granted my eyes are in the over 50 category so they aren't quite as light sensitve as they once were.

The Tusa also comes with a fog resistant film that you apply on your own, not a perfect fit, but covers about 90% of the lens leaving the outside edges. I still used the defog on it, figure when I have a chance to truly play with it by myself I'll try it without and defog and see how it does. I'm not aware of the Tusa having anything on the inside of the lens, as I read the material the coatings were on the external surface. As such, I used the lighter treatment on it without issue.

The fit on the Tusa Zensee is interesting. My normal method of flipping the strap around the front and checking the overall seal, gaps, etc, doesn't apply to it. Where the straps anchor on the side of the skirt it is designed to pull the skirt inwards (my description not Tusa's). Tusa rep had come into the shop and briefed folks on it. When I tried it my way seemed too big, teeter-tottering left to right. But when I flipped the strap over my head as I was supposed to, excellent fit. Even with my mustache it worked well. The skirt was a bit more soft and supple and took a few extra moments to properly set it under the hood when paired with 5mm gloves.

As for the DGX mask: It did finally have a failure. The pin that holds a plastic "barrel bushing" for the retention strap came loose and the barrel bushing disappeared somewhere in the water just as I went to put the mask on. I'm guessing over the many uses over the last couple years (to include letting others use it that may have had it overly tightened) the metal pin in the bit where the strap connects to the mask skirt, worked its way out. I ended up calling DGX to offer a suggestion to prevent it from happening again having some kind of peened head on the pin would keep it from coming out, even if the hole should open up. They listened to what I had to say and ultimately sent me a replacement mask. Now that was completely unexpected as the mask was way past what I would consider a warranty period. Granted my old freezer had a fair number of DGX stickers running down it before it died, and I'm doing my best (to my wife's chagrin) to build another column of DGX stickers on the new freezer. The service I get from DGX just keeps me coming back. When I needed new DUI wrist seals I whipped out my phone and had a new set inbound from DGX ricky-tick.

But it gets better. I got my replacement DGX mask and was diving it not problemo. I found that with the old mask, after slipping the pin back into position, held the strap fine, even without the bushing so I figured I would just use it as a spare. At some point, however, things got moved around and I noticed that I had been making a number of dives on the old mask. Purely by accident and not by design.

TLDR: I still believe that the DGX mask is probably the best value for the money when it comes to masks. I've loaned it to a number of people and it has fit their faces just fine. Low volume, frameless, and one of the best field of views. For those that want UV filtering and don't mind parting with another Benji, check out the Tusa Zensee Pro.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom