Q1988
Registered
I am having trouble with my sidemounts and my OMS harness IQ with a "profile" for side mounts. The chest strap is needed with the side mounts and that goes across my fussion wetsuit right where the inflator valve is. The inflator hose is also a problem as the wings on the pull ring catch on the chest strap and pull it off. This is a real pain because under a few feet of water with no air in the suit you are getting sqeezed and the valve is pushed against your chest. With 5ml wet gloves you have very little grab ability, never mind dexterity.
The chest strap also pushes on the inflator valve and that is no fun at depth.
I need the chest strap done up with the side mounts or they will pull the harness off my sholders.
Best bet is to relocate the valve or put a second one on the suit but where? Any feedback would be appreciated. Water temp in Canada and the Great Lakes at depth can be less than 40F all year round.
No wet suiters please.
The chest strap also pushes on the inflator valve and that is no fun at depth.
I need the chest strap done up with the side mounts or they will pull the harness off my sholders.
Best bet is to relocate the valve or put a second one on the suit but where? Any feedback would be appreciated. Water temp in Canada and the Great Lakes at depth can be less than 40F all year round.
No wet suiters please.