JamesBon92007
Contributor
- Messages
- 3,209
- Reaction score
- 1,305
- # of dives
- 2500 - 4999
I'm posting a picture of a first stage on a reg set (eBay) that says it's a Sherwood. The second stages say "4000" and "3100." The first stage has the HP port in the top section, just under the yoke. There are 3 or 4 LP ports at the bottom of the cylinder section. There are holes in the cylinder for a spanner wrench so this obviously is not a "positive pressure" first stage. Is this even a Sherwood first stage?
Thanks
Thanks