I recently bought my first strobe for my G12. I am now having doubts, if it works properly (or the optical cord). Is this correct:
1) the strobe should work in Av and Tv modes when set to "STTL", "STTL Low", "AUTO", "M" or "FULL" (Picture of the rear of D-2000?
2) the strobe should work in M mode when set to "AUTO", "M" or "FULL"
3) with this setup, I mustn't install the magnet supplied with the strobe?
It sometimes get totally black pictures, even though the strobe is fired at full power. Any idea what the problem might be?
Does the D-2000 require using the Inon Fiber Optic D Cable Type L? I ordered a 10Bar fiber optic cable, but got a cable which is not threaded at the strobe end, but instead has a red rubber-type material cap.
I should be diving with the gear on Saturday for the first time. Please help!
1) the strobe should work in Av and Tv modes when set to "STTL", "STTL Low", "AUTO", "M" or "FULL" (Picture of the rear of D-2000?
2) the strobe should work in M mode when set to "AUTO", "M" or "FULL"
3) with this setup, I mustn't install the magnet supplied with the strobe?
It sometimes get totally black pictures, even though the strobe is fired at full power. Any idea what the problem might be?
Does the D-2000 require using the Inon Fiber Optic D Cable Type L? I ordered a 10Bar fiber optic cable, but got a cable which is not threaded at the strobe end, but instead has a red rubber-type material cap.
I should be diving with the gear on Saturday for the first time. Please help!