Hi,
I am getting a Shearwater Perdix AI and would appriciate a few thoughts.
Current setup:
- 6" rubber with SPG pointing down
Planned setup:
- 6" rubber with AI transmitter, hold against tank with a bungee (reducing entanglement risk and risk of boatsman holdinh my tank by the transmitter)
- Button SPG on the upper HP port as backup (no entanglement risk at all)
I personally do not see an increased entanglement risk compared to other SM configs but instead the beauty of having both gas preasures on my Perdix.
Further I understand that the Perdix AI with serial number registered transmitters are very reliable and do not have the false reading issues like Suunto D6i had.
About myself: Clearly reg diving only with a bit of wreck diving in the future.
Would appreciate some thoughts
Cheers,
Dan
I am getting a Shearwater Perdix AI and would appriciate a few thoughts.
Current setup:
- 6" rubber with SPG pointing down
Planned setup:
- 6" rubber with AI transmitter, hold against tank with a bungee (reducing entanglement risk and risk of boatsman holdinh my tank by the transmitter)
- Button SPG on the upper HP port as backup (no entanglement risk at all)
I personally do not see an increased entanglement risk compared to other SM configs but instead the beauty of having both gas preasures on my Perdix.
Further I understand that the Perdix AI with serial number registered transmitters are very reliable and do not have the false reading issues like Suunto D6i had.
About myself: Clearly reg diving only with a bit of wreck diving in the future.
Would appreciate some thoughts
Cheers,
Dan