Does anyone know the O-ring sizes for KUBI dry glove system and more importantly, where to purchase them in the US?
I'm still on my original set of o-rings after 2 years with 80mm rings and they're starting to get a bit worn so I'd like to replace them.
I'd order a set from KUBI store in the UK but it's almost 27USD for shipping across the pond for a set of o-rings.
The KUBI_instructions_glove.pdf lists sizes but it doesnt specify which size ring from what I can see.
I found a post here that says these are the sizes but I don't know how accurate it is: Kubi O rings [Archive] - The Dive Forum
O-Rings (nbr70) 80mm 90mm 100mm
Glove part fixing 69.1 x 5.8 69,1 x 5,8 79,1 x 5,8
Glove part security 62 x 4 72 x 4 82 x 4
Glove part sealing 65 x 5 75 x 5 74,63 x 5,33 (75 x 5) 2.559 X 0.196
Cuff part security 62 x 4 72 x 4 82 x 4
Cuff part fixing 74,1 x 5,8 84,1 x 5,8 94,1 x 5,8
If I can confirm sizes I'm sure there is a DIY solution from an online o-ring vendor..
I'm still on my original set of o-rings after 2 years with 80mm rings and they're starting to get a bit worn so I'd like to replace them.
I'd order a set from KUBI store in the UK but it's almost 27USD for shipping across the pond for a set of o-rings.
The KUBI_instructions_glove.pdf lists sizes but it doesnt specify which size ring from what I can see.
I found a post here that says these are the sizes but I don't know how accurate it is: Kubi O rings [Archive] - The Dive Forum
O-Rings (nbr70) 80mm 90mm 100mm
Glove part fixing 69.1 x 5.8 69,1 x 5,8 79,1 x 5,8
Glove part security 62 x 4 72 x 4 82 x 4
Glove part sealing 65 x 5 75 x 5 74,63 x 5,33 (75 x 5) 2.559 X 0.196
Cuff part security 62 x 4 72 x 4 82 x 4
Cuff part fixing 74,1 x 5,8 84,1 x 5,8 94,1 x 5,8
If I can confirm sizes I'm sure there is a DIY solution from an online o-ring vendor..
Last edited: