The Chairman
Chairman of the Board
I noticed a problem in the file I used to create that 7mm STL. I fixed it and just replaced the faulty STL. If you already downloaded it, you should download it again.
A repository of 3D print STL sources
- Thread starter James79
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
The Chairman
Chairman of the Board
One last one. This is like the first one, only for 7mm (1/4") bungee cord. Just a note, but I kept the rings to 5mm, so, you should be able to clip onto it with any normal boltsnap or double ender.
Hi All,
Does anyone have a model, or the thread specification for an Apeks Drysuit valve?
Thanks
John
Does anyone have a model, or the thread specification for an Apeks Drysuit valve?
Thanks
John
Timmyjane
Contributor
Scubapro G250 Seat Saver and Face Removal Tool
TMurrr
Contributor
Does anyone have a model for something like this?
www.divegearexpress.com
Weight Plates - Set of Two
Weight Plates are a quick and easy way to add blocks of lead to { 2.0 in | 5.1 cm} webbing such as a harness or weight belt.
www.divegearexpress.com
OP
Not my design, but there's one on thingiverse: Weight On Webbing (WoW) - Scuba Weight Holder by Roman_MarkovtsevDoes anyone have a model for something like this?
Weight Plates - Set of Two
Weight Plates are a quick and easy way to add blocks of lead to { 2.0 in | 5.1 cm} webbing such as a harness or weight belt.
HereDoes anyone have a model for something like this?
Weight Plates - Set of Two
Weight Plates are a quick and easy way to add blocks of lead to { 2.0 in | 5.1 cm} webbing such as a harness or weight belt.
Timmyjane
Contributor
This might work for you. I recommend PET-G, thicker walls, and 60% infill.Does anyone have a model for something like this?
Weight Plates - Set of Two
Weight Plates are a quick and easy way to add blocks of lead to { 2.0 in | 5.1 cm} webbing such as a harness or weight belt.
How are they holding up? I tried printing these a while back but some of the spikes fell off. I do think I had maybe not the greatest roll of PETG.
I bought the highland version when they were on sale and the design is awesome. Perfect for changing just a little weight on the fly.
Similar threads
