Blacktip nose clips

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Stuartv - could you show a picture of how you attached the bracket?

2020-12-22 14.10.15-small.jpg
 
I use 7/64" dyneema, with loops spliced on each end so no knots, along with a 1" stainless o-ring and a large bolt snap.
IMG_20200315_155126.jpg


I put one loop through the big bolt snap, thread it diagonally through the holes in the nose cone, then loop the stainless o-ring through the other end. No need to unscrew the handle.
IMG_20200315_155331.jpg


I sized the dyneema line so it all clips together, then disconnect and I clip the bolt snap to my left chest D-ring
IMG_20200315_155304.jpg


With 12 AH Dewalt batteries, in salt water, I took both metal nose plates out and my Blacktip is pretty much neutral buoyant
 

Back
Top Bottom