• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

D600 ikelite housing - aperture ring control

Discussion in 'Ikelite' started by Bubbz, Mar 13, 2017.

  1. Bubbz

    Bubbz Garibaldi

    # of Dives: 50 - 99
    Location: Australia
    1
    0
    1
    Noticed ? loose aperture ring control screw after first dive
    No leaks but not sure if this was present before or after.

    See below vid link



    Will this need to be ? tightened? and if so how?
    Thanks in advance.
     
  2. Ikelite Staff

    Ikelite Staff Dive Equipment Manufacturer

    863
    21
    18
    Bubbz,

    It is normal for the screw to spin as the gear is turning. The screw is locked into the bolt going through the wall of the housing, it is not threaded directly into the housing.

    Regards,

    Brett Foster - Ikelite
     

Share This Page