• Welcome to ScubaBoard

  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Mares Nemo Air Recall Quick Disconnect Difference

Discussion in 'Mares... Just add Water!' started by Zak OHara, Jun 16, 2010.

  1. Zak OHara

    Zak OHara Dive Equipment Manufacturer

    # of Dives: I'm a Fish!
    Location: Pac NW
    Attached is an image of two Nemo Air quick disconnectors. Image of quick disconnect on the top is the old connector that needs replacing. If you notice it does not have a ring around the metal area. The bottom image is the current connector that should be installed by a Mares authorized technician. The current connector has a ring around the connector in the metal area. If you have any questions whether you have the correct fitting, please consult your nearest authorized Mares retailer.

    Attached Files:

    mantababe likes this.
  2. kevinl4270

    kevinl4270 ScubaBoard Sponsor ScubaBoard Sponsor

    # of Dives: 200 - 499
    Location: Philippine Islands
    Thanks again for passing on some good info. I appreciate all your help.

Share This Page