Scubapro jet fins

[PedroPec]

Hi. Anyone with Scubapro Jet fins, could help me with the dimension A and B in the attached file, for XL and XXL size?
Many thanks!
Pedro

 

[covediver]

Measured my yellow Jetfins XXL purchased about 6 years ago
A Approximately 12 cm (4.75 inch)
B Approximately 8.25 cm (3.25 inch)

 

[PedroPec]

Measured my yellow Jetfins XXL purchased about 6 years ago
A Approximately 12 cm (4.75 inch)
B Approximately 8.25 cm (3.25 inch)

I supposed the measures didn't change. Many thanks for your help

 

[Mike1967]

XL
A = 10cms
B = 8cms

 

[PedroPec]

XL
A = 10cms
B = 8cms

Thank you very much. It'll be easier to buy the correct one

 

[diver-man]

There clearly is a size gap between XL and XXL.
My past experience: XLs were too small, but XXLs were like for the Yetty.

 

[covediver]

There clearly is a size gap between XL and XXL.
My past experience: XLs were too small, but XXLs were like for the Yetty.

I think so. I use XL for wetsuit booties and XXL for DUI rockboots. XXL seem much larger.

 

[PedroPec]

I think so. I use XL for wetsuit booties and XXL for DUI rockboots. XXL seem much larger.

Yes... and the spring with XL is too tighted

 

[Mike1967]

Yes... and the spring with XL is too tighted

It's the cord inside the spring being too short, I replaced it with some paracord a couple of inches longer and it made a big difference.

 

[PedroPec]

It's the cord inside the spring being too short, I replaced it with some paracord a couple of inches longer and it made a big difference.

Is it easy to do that?