steel /aluminum mark on tank

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

vicmac

Registered
Messages
39
Reaction score
0
Location
Nova Scotia
# of dives
0 - 24
Hi, I m looking to buy a second hand steel 100 tank. There is one I have seen but the owner does not know what it is :no: anyway I asked him to write down the markings on the neck. How do I tell if it is steel or aliminium, I tried to look it up and all I found out was for aliminum it will say al, and also some steels will say pst, for pressed steel tank. Can anyone give me more info please? Cheers!:popcorn:
 
Hi, I m looking to buy a second hand steel 100 tank. There is one I have seen but the owner does not know what it is :no: anyway I asked him to write down the markings on the neck. How do I tell if it is steel or aliminium, I tried to look it up and all I found out was for aliminum it will say al, and also some steels will say pst, for pressed steel tank. Can anyone give me more info please? Cheers!:popcorn:

If a magnet sticks to it it is steel, if it doesn't it's aluminum.
Aluminun tanks other than the very first old ones made when aluminum came into general use will be marked AL before the pressure rating, usually 3000 psi. Old ones will be stamped SP but you don't want to buy those any way.
Steel tanks will be stamped 3AA or E before the pressure rating but the E marked tanks will be high pressure tanks 3400 psi and above.
 
Ask the owner to write down the numbers for us too.
 
If the bottom is flat you can pretty much count on it being aluminum, it fact that may be an absolute statement but I'm not positive.
 
ok here s the info he s given me, though it seems he hasn't given all the markings, any way heres what I have 8A191, 0208302 and 2A181, 7A986
 
If the bottom is flat you can pretty much count on it being aluminum, it fact that may be an absolute statement but I'm not positive.

Not quite true. Buddy of mine has some ancient Al90's with round bottoms.
Probably fair to say that 99.9999% of flat bottomed tanks are Al.
 
Owner wrote...."K I dont see a tc on it...and a magnet DID stick to it!LOL. and it has a flat bottom."
Right Im really confused now! if a magnet sticks its steel....yes its steel then,...hold on it has a flat bottom!!????
 
Not quite true. Buddy of mine has some ancient Al90's with round bottoms.
Probably fair to say that 99.9999% of flat bottomed tanks are Al.

I kind of figured there may have been a few. Ii can live with 99.9999% :)

Pete
 
Owner wrote...."K I dont see a tc on it...and a magnet DID stick to it!LOL. and it has a flat bottom."
Right Im really confused now! if a magnet sticks its steel....yes its steel then,...hold on it has a flat bottom!!????


Any chance they put the magnet on the valve rather than the tank itself?

Or maybe there was glue on the magnet:D
 
https://www.shearwater.com/products/swift/

Back
Top Bottom