Uwatec Smart Z - Service Icon

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

UaVaj

Contributor
Messages
418
Reaction score
5
Location
SouthEast Florida
# of dives
I just don't log dives
What is going on with my dive computer - if the service icon is display.

The owner's manual states that when the service icon is display. I need to take to the dealer for service. WHAT IS THE NEEDED SERVICE?

Battery is at 75% so it cannot be a dead/weak battery.
 
Last edited:
Any Uwatec Expert / Technician here?
 
What's the error code? Even though it says 75% on the battery, it could still be the battery. I've been using my friends Smart Pro, and it died a few weeks ago. Turns out it was just the battery, but the night before it claimed it had 84% capacity remaining.
 
How do I find the error code?
 
It SHOULD have it displayed on the screen. When the smart pro died, it had the service icon and "E6" on the screen. From what I found, "E4" & "E6" usually mean battery.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom