My wife almost passed out when I told her I wanted a $1200 "flashlight".
Mine quickly remembered the ~$1200 shoe collection and feigned encouragement Too funny, though.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
My wife almost passed out when I told her I wanted a $1200 "flashlight".
You'll see the DIR/GUE crowd diving primarily Halcyon equipment. This is the brand pushed on that page and there are connections between GUE and Halcyon in the higher ups.
I am really curious where this 'HUGE . . . spike' in NC, particularly in the Raleigh area, might be. I would expand that to the Durham area as well. If you take the two largest / most active LDS operations (in terms of new certs, dive training, dive travel, dive clubs, etc.) in the Raleigh area, one is not even a Halcyon dealer. The other is, but I am pretty sure that nobody in that shop would be a DIR Nazi, even if we do sell quite a bit of Halcyon gear.NC. There was a huge Halcyon spike out here and the instructors here are brand agnostic but they push Halcyon gear hard.
As well you should be. Who in the Raleigh area is a DIR Nazi? Nothing against being one, I just don't see them in action that much.I know it's not 100% true but the majority around here do. Sorry got yelled at by a DIR guy the other day and was a little put off
NC. There was a huge Halcyon spike out here and the instructors here are brand agnostic but they push Halcyon gear hard. The DIR groups were out here a long time ago though when GUE started. I haven't seen an instructor out here without Halcyon gear though. I know it's not 100% true but the majority around here do. Sorry got yelled at by a DIR guy the other day and was a little put off.
I am trying to eventually setup dual tanks for diving. I am new into this deal of duals. I've seen it many times, but don't remember how there rig was setup. For duals, I know I'll need a bc, tanks, bands, maifold, 1st and 2nd stages regs. and a back plate.
What I don't know it the tank type that is perfered is? steel or alumin. Then there is din or yoke valves? 200 or 300bar manifolds?
For the regs. I need a primary and secondary, spg, wing hose. How would you hook them up a to 2 first stages, due to the manifold? Anything else?
Yes, at least for backmount doubles. Even then, you could set up manifolded or independent doubles, in which case the manifold is not part of the rig. For SM, bands would also not be part of the rig, and a backplate may or may not be depending on how you decide to set up a SM rig.I am trying to eventually setup dual tanks for diving. . . . For duals, I know I'll need a bc, tanks, bands, maifold, 1st and 2nd stages regs. and a back plate.
The tank material and size depends on 1) your personal perferences and 2) the type (e.g. a) depth / time; b) salt water/ freshwater environment; and c) exposure suit - wetsuit/drysuit) of diving you are doing with them. For backmount, I dive doubled AL80s, HP steel 100s, 120s, and 130s. And, I like all of them. I sidemount in AL80s, HP 100s, and LP112s, and like all of them as well. Most people diving doubles are diving DIN, although that is not universally true. I would suggest you think DIN tank valves (and regs) if you are moving to doubles, but others may disagree. At one time, 300 bar was considered de riguer, but now with Thermo Pro valves, 230 bar is quite common, and I don't see that as a decision factor.What I don't know it the tank type that is perfered is? steel or alumin. Then there is din or yoke valves? 200 or 300bar manifolds?
For backmount, many people set up the right post (first stage) to have the primary (e.g. long hose) second stage, and the primary (BCD) LPI hoses, while the left post has the SPG hose, the alternate (bungeed necklace) second stage hose, and the secondary (e.g. drysuit) LPI hose. That is not univessal by any means.For the regs. I need a primary and secondary, spg, wing hose. How would you hook them up a to 2 first stages, due to the manifold?
Not sure why you want to dissect my post for, I have my opinions as you do as well. Yea I live in Florida and for doubles 85's and 95's are the norm. Maybe he needs to ask what all the guys are diving in his area. As far as a balanced rig thay may be fine for you and him so have fun with it. I rely on redundant lift in case of primary wing failure. As far as you not knowing what a hot or cave fill is Im not gonna tell you. Keep diving your balanced aluminum 80's and you wont need to ever know.I think your 'norm' is more of a regional skew. Choice of tanks is very specific and generally defined by exposure protection/weighting. Most wetsuit divers, and many drysuit divers, find it impossible to create a safe, balanced rig using steel cylinders.
In my experience, having dived 28 countries on 4 continents, ali tanks are far more popular. That doesn't make them right or wrong... just the preferable choice for those divers in those situations.
The OP needs to investigate the concept of 'Balanced Rig'. The essense of which is that the diver must be able to hold a shallow stop with a nearly empty tank, whilst retaining the ability to swim the rig to the surface in the event of buoyancy failure.
The weighting of the total rig needs to be finely calculated, with particular attention upon the ratio of ditchable and non-ditchable weight.
I'm not quite sure what you mean by this....