DIR- GUE Replaceable Drysuit Neck and Wrist Seals - Latex or Silicone?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Time for a yoga class.

Funny comment, but not the problem. The ring was dropping in between the handwheel and palm of the hand.
 
Funny comment, but not the problem. The ring was dropping in between the handwheel and palm of the hand.
Interesting…maybe the sleeves were a little long as well?

I’m sure you know this but for anyone else reading…you want to get the smallest ring size that your hand can fit through comfortably. Kubi dealers should have a board with holes the same size as the glove side rings so you can stick your hand through to check.
 
Interesting…maybe the sleeves were a little long as well?

I’m sure you know this but for anyone else reading…you want to get the smallest ring size that your hand can fit through comfortably. Kubi dealers should have a board with holes the same size as the glove side rings so you can stick your hand through to check.

Or if you’re ordering online, they have a sizing guide you can print out.
 
Funny comment, but not the problem. The ring was dropping in between the handwheel and palm of the hand.

never seen that but the thin neoprene seal protectors should prevent that
 
https://www.shearwater.com/products/perdix-ai/
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom