Apeks ATX50 to DIN

[ScoobieDooo]

I have an ATX50 that I'd like to convert to DIN. What do I need to accomplish this? Can this be done my myself?

 

[metridium]

The ATX50 is a second stage reg, not a first. Do you have the DST, DS1, DS4, US4, or TX100 first stage?

 

[ScoobieDooo]

Ahh, so whats the 1st tahe comes with an ATX50? Mine has the dry kit on it. DS-something?

 

[metridium]

According to the Apeks website, the only parts you'd need would be a Din handwheel assembly (AP0211). Can you get one easily?

 

[jonnythan]

http://www.scubastore.com/producte.asp?id=39&id_modelo=3106&desde=0

 

[ScoobieDooo]

metridium,
There is an Apek's dealer about 2 hrs away from me...was looking at DIVEINN to see if they had them...

 

[ScoobieDooo]

metridium,
Not sure...Apeks' web site is kinda lacking in calling out models.

I have a turret and its the dry sealed yoke model.

Apek's sure needs a nicer web site!

 

[metridium]

ScoobieDooo wrote...
I have a turret and its environmentally sealed yoke.

Sounds like a DST.

 

[metridium]

jonnythan wrote...
http://www.scubastore.com/producte.asp?id=39&id_modelo=3106&desde=0

Great link...even has instructions.

 

[ScoobieDooo]

Am I correct in assuming that the DST = Dry Seal Turret?

And the US4 is the model w/o a dry seal and no turret?