Bearded_fire_worm
Registered
- Messages
- 24
- Reaction score
- 3
I put together a 19 cu ft. pony bottle that i can clip to by BC . I like the thought of have another redundant complete system ready for use if i should need it or a buddy.
My question is when using it should i open the valve and leave it open before the dive or pressure up the first stage and hoses then close the valve after testing everything works? My thoughts are to leave the valve open so that nothing needs to be done if it needs to be put to use quickly.
Right now i only have an extra mk10 yoke 1st stage for it, but will have a mk17 din that i could put to use.
Anyone see anything wrong with the setup?
My question is when using it should i open the valve and leave it open before the dive or pressure up the first stage and hoses then close the valve after testing everything works? My thoughts are to leave the valve open so that nothing needs to be done if it needs to be put to use quickly.
Right now i only have an extra mk10 yoke 1st stage for it, but will have a mk17 din that i could put to use.
Anyone see anything wrong with the setup?