Question about Hog tech fins?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

gatordiver77

Registered
Messages
13
Reaction score
0
Location
Gainesville, Florida
# of dives
25 - 49
Hello Edge,

I have a question about your HOG tech fins. Are all parts of the fins made out of the same rubber or is the foot pocket a different rubber than the rest of the fin? Thanks.

Shaun
 
Hello Edge,

I have a question about your HOG tech fins. Are all parts of the fins made out of the same rubber or is the foot pocket a different rubber than the rest of the fin? Thanks.

Shaun

Hi Shaun,

There is actually three different compounds used in the foot pocket area. The stiffest along the bottom and over your toe, then as it meets your foot on the top the last inch is softer. It is also softer on the sides directly above where the strap posts are.

Hope that helps!

Best,

Chris
 
Are the spring heels available stand alone?
 
I haven't done them alone yet, however I am sure I can take care of you thru one of my dealers.
 
What are the buoyancy characterisics of these fins?
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom