jtsmith
Registered
I have a RIX SA6 6CFM compressor. This was a military unit that was connected to a Gas motor. I had removed the gas one and put a 5hp electric on there. I used it several years pumping regular air when I lived in Florida. I moved, had kids, and I have not run the unit since 2004. I am about to start diving again and when I fired it up it ran few minutes building up pressure then the motor started shooting fire out of the back and it's dead. I don't dive enough anymore to deal with fixing it. It comes with a Siemens motor start/stop controller several hoses, filler whips, tons of other connections, limiters, etc. I also have a Nitrox Premixer that was never put into use. I am including a filter from one of the military oxygen carts (Aero Dri).
The compressor was pumping air...but I can't guarantee all the valves and reliefs are functioning perfect since it didn't reach pressure. Also, the fan is missing some blades and needs a replacement. I placed a Lasko high velocity fan in front of it for years of use with no problems.
I am located in Pascagoula and I need to get $1,000 out of it or I'll just keep it and get it working again.
Thanks,
JT
The compressor was pumping air...but I can't guarantee all the valves and reliefs are functioning perfect since it didn't reach pressure. Also, the fan is missing some blades and needs a replacement. I placed a Lasko high velocity fan in front of it for years of use with no problems.
I am located in Pascagoula and I need to get $1,000 out of it or I'll just keep it and get it working again.
Thanks,
JT