Just recently bought a TWIN X7-80 setup. Seems like a great setup. We are currently in the middle of nowhere with the closest dive shop about 2.5 hours away... (gotta love Iowa) We have recently run into problems setting up the tanks and manifold. We were told that the valves and manifold would be setup for us in the mail, however this was not the case. We cannot get the screws out of of the valves for doubles setup. I understand that the tank valve screws have one reverse thread, but cannot seem to get them off. We have screwed the valves into the tanks in order to do so and thought we were using the correct tools...we know we aren't supposed to crank on them, but are so frustrated we are ready to give up and just send em back in and find a different setup just for our sanity and lack of a LDS around. any help would be greatly appreciated. Thanks!
P.S. Yes we are competent divers and have been diving for over 30+ years with tons of experience putting doubles together...Just never run into this problem.
-Jan
P.S. Yes we are competent divers and have been diving for over 30+ years with tons of experience putting doubles together...Just never run into this problem.
-Jan