• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

xDeep just released their regulator

Discussion in 'Regulators' started by LFMarm, Apr 28, 2021.

  1. MichaelMc

    MichaelMc Working toward Cenotes ScubaBoard Supporter

    # of Dives: 100 - 199
    Location: Berkeley, CA
    2,249
    1,425
    Returning to decorum and the OP:
    Demis's photos and review were helpful. Thanks for pointing them out.

    I'd be interesting to try one as it looks nice for sidemount.

    I learned a few ideas from his deployment video within his post. Very worthwhile.
     
  2. Joris Vd

    Joris Vd Contributor

    # of Dives: 200 - 499
    Location: Belgium
    216
    177
    I like the hose routing for a stage setup. The LPI can be stowed very cleanly this way. Although if you dive without an LPI an apeks dst-style setup would still be equally good I guess.

    I don't know if anyone is up to snuff about EN250 EU standards, but in the manual it clearly says the regulator conforms to EN250-2014, not 250a, the main standard cold water regs use right now. Does this just mean they didn't send them in for 250a testing or?
     
  3. drakcheslav

    drakcheslav Contributor

    # of Dives: 100 - 199
    Location: Serbia
    239
    168
    They mentioned when ordering that it's going to be EN250A. It's probably a typo.
    You can clearly see that on the regulator body it says CE EN250A >4C
     
  4. kelemvor

    kelemvor Big Fleshy Monster ScubaBoard Supporter

    # of Dives: 200 - 499
    Location: Largo, FL USA
    7,344
    4,361
    I avoid that site. I'm sure answers will turn up here eventually.
     
    LiteWeight and Bob DBF like this.
  5. wetb4igetinthewater

    wetb4igetinthewater Instructor ScubaBoard Supporter

    # of Dives: 500 - 999
    Location: Seattle
    6,094
    4,480
    FB is a far better resource than SB for sidemount info. But maybe it will trickle in.
     
    Pkishino likes this.
  6. happy-diver

    happy-diver Skindiver Just feelin it

    # of Dives: 2,500 - 4,999
    Location: Same ocean as you!
    2,447
    1,703
    Turncoat arsebookians!
     
    rhwestfall and Eric Sedletzky like this.
  7. Bob DBF

    Bob DBF Contributor

    # of Dives: I just don't log dives
    Location: NorCal
    11,873
    18,599
    Not sounding like a happy-diver now are we. I'm no fan of the place I never go either.
     
    Eric Sedletzky and Bigbella like this.
  8. happy-diver

    happy-diver Skindiver Just feelin it

    # of Dives: 2,500 - 4,999
    Location: Same ocean as you!
    2,447
    1,703
    That could not be said but in jest, of places that serve a distinct purpose
     
  9. Josh the diver

    Josh the diver Contributor

    # of Dives: 200 - 499
    Location: Wisconsin
    103
    27
    So is there a better way to mount a transmitter and gauge to this first stage in sidemount. I hate how with my dive rite XT1 first stage in sidemount if you want both a gauge and transmitter one has to be sticking straight up.
     
  10. rsingler

    rsingler Scuba Instructor, Tinkerer in Brass Staff Member ScubaBoard Sponsor

    # of Dives: 500 - 999
    Location: Napa, California
    6,000
    7,875
    Splitter block on a short hose with a button gauge.
    One hose.
    eBay.
    Screenshot_20210506-111150_eBay.jpg IMG_20210422_192951.jpg
     

Share This Page