Justin4092
New
Yes it has never showed a 3000psi tank highest I have gotten it was on a tank that read 3700 on a hp 120 and it read 2700
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Maybe someone can explain this my perdix ai reads 1000 psi lower then any other spg or dive computer yet as time goes on they end up matching up around the 1500psi range I am new to the perdix so I want to know if it is something I have done or something with the transmitter
Yes it has never showed a 3000psi tank highest I have gotten it was on a tank that read 3700 on a hp 120 and it read 2700
Check that your Rated Pressure setting under "T1/T2 Setup is set high enough. The manual says this is really just to calibrate the tank pressure bar graph, but it can't hurt to check...
The rated pressure is purely to calibrate the visual tank representation. The sensor calculates a pressure and then transmits blind. If you set several dive computers to receive it, all of them would read the same pressure regardless of the computer settings.@Justin4092 I'd be curious if this is the problem. I found my Rated pressure was a little off. I wonder if this is why my Perdix AI is a little lower than the digital gauge at the fill station.
perdix ai reads 1000 psi lower then any other
If you're suicidal maybe?it is tempting to fall into the trap of seeing a pressure down to the last psi
Ha! Didn’t mean that way. If you see 2654 psi it’s super tempting to assume that it’s super accurate vs a spg of 2600-ish.If you're suicidal maybe?
Ha! Didn’t mean that way.